I am configuring a multi-country cluster and am following Cisco's "Globalize on Ingress, Localize on Egress" methodolgy.
I am using E.164 route patterns and want to strip the leading "+" and prepend the local international dialling code 00.
I have set up a Called Party Transformation plus CSS etc. and applied it to a gateway router. However, when I use Dialled Number Analyzer to test the dial plan (gateways are not yet in place) the called party transformation is not applied.
First question is does DNA correctly process this - can anyone with a suitable cluster setup do a quick test. If the answer is yes then any suggestions about possible problems would be welcome (I guess I would need to post more information).
I had to recently test this out more myself and I found that transformations that are performed using "Called Party Transformations" applied on the gateway are not seen in DNA. I am running CUCM 8.5(1) in my lab and tested with both H.323 and MGCP for the DNA output. The only way I could confirm the transformation patterns were working was to do a debug on the gateway.
Please rate helpful posts!