Point to point connection using E1 network

Unanswered Question
amar_5664 Mon, 07/05/2010 - 17:30
User Badges:

not sure what you are trying to achieve this is end of life model


you can use VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1

Leo Laohoo Mon, 07/05/2010 - 17:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless


you can use VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1

I'm not sure VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1 will work.


Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Card

http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b9c_ps282_Products_Data_Sheet.html

Rick Morris Wed, 07/07/2010 - 07:53
User Badges:
  • Silver, 250 points or more

Here is the link you need for this device:


http://www.cisco.com/en/US/partner/products/hw/routers/ps221/products_data_sheet09186a00800920ec.html


The card according to this data sheet is:


WIC-1T

One-port serial, asynchronous and synchronous (T1/E1)


or



VWIC-1MFT-E1

1-Port RJ-48 Multiflex Trunk - E1


http://www.cisco.com/en/US/partner/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml#platform


This link also provides the required IOS

Actions

This Discussion