Configuring PBR on Cisco 3750E

Unanswered Question
Jul 6th, 2010
User Badges:

Hi,



I have a cisco 3750E running c3750e-universalk9-mz.122-53.SE2.bin. The ip policy route-map command is not available under the SVI. Any ideas why?


Does this switch not support PBR?


I configured the sdm prefer routing and rebooted, still the command is not available


Thanks


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nagaraja Thanthry Tue, 07/06/2010 - 10:53
User Badges:
  • Cisco Employee,

What license you have on the box? PBR needs IP Services feature set. So, if you have just the base license, then you might need to get the IP Services license. Hope this helps.


Regards,


NT

Ho yin Chan Tue, 07/06/2010 - 11:26
User Badges:

Besides the IPServices image, you also need to change the SDM from "Desktop Default" to "Desktop Routing". i.e. (config)#sdm prefer routing.

Nkechi Latunji Tue, 07/06/2010 - 17:02
User Badges:

This is the image I am running on the switch c3750e-universalk9-mz.122-53.SE2.bin. Only IP Base and this image are available for download, no  IP Services. I already tried the sdm prefer routing

Nagaraja Thanthry Tue, 07/06/2010 - 17:19
User Badges:
  • Cisco Employee,

The IP Services is a licensed feature. You might have to contact your reseller and see if you can buy the license. The feature is already present in the image but is not enabled because of the license. Hope this helps.


Regards,


NT

wang baojun Tue, 07/06/2010 - 20:55
User Badges:

hello,


i have the feature you want  in this platform ,if you want it , contact me in msn.

Actions

This Discussion