cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
911
Views
0
Helpful
1
Replies

Werid Issue

wrobbin
Level 1
Level 1

so far on 3 of the my device it will stop optimizing and when i login i get this

Cisco Wide Area Application Engine


WAE-0370-574 login: admin
Password:
No directory /local/local1!
Logging in with home = "/".
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
WAE-0370-574#

it appears like everthing has been deleted from flash

WAE-0370-574#dir
      size          time of last change             name
--------------  -------------------------          -----------
WAE-0370-574#

Even when I reload the image nothing....

WAE-0370-574#sh flash
Your software installation appears to be incomplete.
(could not access /sw/UP-TO-DATE or /swstore/manifest)
Please run 'copy ftp/cdrom install' to install a new image.
System image on flash:
Version: 4.1.5f.b2

System flash directory:
System image: 185 sectors
Bootloader, rescue image, and other reserved areas: 41 sectors
256 sectors total, 30 sectors free.

WAE-0370-574#

Enterprise     active      07/07/2010      admin
Video          not active
Virtual-Blade  not active
WAE-0370-574#

WAE-0370-574#sh accelerator

Accelerator     Licensed        Config State    Operational State
-----------     --------        ------------    -----------------
cifs            Yes             Enabled         Shutdown
epm             Yes             Enabled         Shutdown
http            Yes             Enabled         Shutdown
mapi            Yes             Enabled         Shutdown
nfs             Yes             Enabled         Shutdown
ssl             Yes             Enabled         Shutdown
video           No              Enabled         Shutdown
wafs-core       Yes             Disabled        Shutdown
wafs-edge       Yes             Disabled        Shutdown
WAE-0370-574#

Any suggestions ?

1 Accepted Solution

Accepted Solutions

Hi,

The message your receive during login indicates either a failed upgrade/install of WAAS software or hard disk failure(s).  Right now this device isn't running WAAS from disk as it should (it's running a limited version off of flash), and as such will not optimize traffic.

The first step to resolve this would be to re-install the software bin image (copy ftp install )

After the reload to complete the install issue the command show disk details to view the health of the disks.

Cheers,

Mike Korenbaum

Cisco WAAS PDI Help Desk

http://www.cisco.com/go/pdihelpdesk

View solution in original post

1 Reply 1

Hi,

The message your receive during login indicates either a failed upgrade/install of WAAS software or hard disk failure(s).  Right now this device isn't running WAAS from disk as it should (it's running a limited version off of flash), and as such will not optimize traffic.

The first step to resolve this would be to re-install the software bin image (copy ftp install )

After the reload to complete the install issue the command show disk details to view the health of the disks.

Cheers,

Mike Korenbaum

Cisco WAAS PDI Help Desk

http://www.cisco.com/go/pdihelpdesk

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: