07-07-2010 08:35 AM - edited 07-03-2021 06:57 PM
Hello,
I'm new to the community and wanted to see if I could receive a little assistance with a question I had regarding the Aironet 1300 wireless bridge.
Is there a way to statically assign only one MAC address for the bridge to connect to instead of roaming to the strongest signal?
Solved! Go to Solution.
07-07-2010 09:07 AM
Sure. On the non-root bridge you could define the parent under the radio interface and define the root bridge's mac address.
On the root bridge you could configure an association access-list to only allow the non-root
07-07-2010 09:07 AM
Sure. On the non-root bridge you could define the parent under the radio interface and define the root bridge's mac address.
On the root bridge you could configure an association access-list to only allow the non-root
05-29-2011 07:39 AM
Hi,
Please mark the Question as Answered if the provided information is correct and issue is fixed.
thanks,
Vinay
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: