Broadcast Hunt Groups on UC520

Answered Question
Jul 7th, 2010

Hello All,

          Are Broadcast hunt groups supported on the UC520 in the latest release?  Thanks

Jason

I have this problem too.
0 votes
Correct Answer by Gabriel Saavedra about 6 years 4 months ago

Hello Jason,

In Cisco Unified CME 4.3 and later versions you can use SCCP phones with the voice-hunt group

You can configure those hunt groups like this:

voice hunt-group X parallel

pilot XXXX

list XXX, XXX,

final XXX

timeout X

This type of hunt group (parallel) should ring all the phones at the same time.

Gabriel.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Gabriel Saavedra Wed, 07/07/2010 - 10:39

Hello Jason,

In Cisco Unified CME 4.3 and later versions you can use SCCP phones with the voice-hunt group

You can configure those hunt groups like this:

voice hunt-group X parallel

pilot XXXX

list XXX, XXX,

final XXX

timeout X

This type of hunt group (parallel) should ring all the phones at the same time.

Gabriel.

Actions

This Discussion