07-07-2010 04:06 PM - edited 03-06-2019 11:56 AM
one basic doubt
when i create a VLAN 172.16.30.0/24
generally i do the routing in EIGRP as network 172.16.0.0 so can we use network 172.16.30.0 0.0.0.255 in eigrp routing
karthik
Solved! Go to Solution.
07-07-2010 04:27 PM
EIGRP supports VLSM. So, yes, you can use "network 172.16.30.0 0.0.0.255" statement. Please make sure that if you have different major networks on the router, you have disabled "auto-summary".
Hope this helps.
Regards,
NT
Note: Please rate useful posts
07-07-2010 04:33 PM
Hi,
eigrp in case of no wildcard mask , will consider classfull mask for that network segment which in your case is class b mask ( 255.255.0.0 ). so assigning a wildcard mask will make sure that Eigrp knows the exact vlsm subnet is attached to the interface.
hope it helps
manish
07-07-2010 10:38 PM
one basic doubt
when i create a VLAN 172.16.30.0/24
generally i do the routing in EIGRP as network 172.16.0.0 so can we use network 172.16.30.0 0.0.0.255 in eigrp routing
karthik
Hi Karthik,
EIGRP carries the subnet mask in the routing update, and it does support both variable length subnet masks (VLSM) and Classless Inter-Domain Routing (CIDR). In other words, you can subnet your network from the classful boundaries (where a class A network is 10.0.0.0 with a 255.0.0.0 subnet mask, etc.), and EIGRP will work fine.
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
07-07-2010 04:27 PM
EIGRP supports VLSM. So, yes, you can use "network 172.16.30.0 0.0.0.255" statement. Please make sure that if you have different major networks on the router, you have disabled "auto-summary".
Hope this helps.
Regards,
NT
Note: Please rate useful posts
07-07-2010 04:33 PM
Hi,
eigrp in case of no wildcard mask , will consider classfull mask for that network segment which in your case is class b mask ( 255.255.0.0 ). so assigning a wildcard mask will make sure that Eigrp knows the exact vlsm subnet is attached to the interface.
hope it helps
manish
07-09-2010 11:10 AM
Thanks for the reply I got the needed information
Thanks
Karthik G
Network Administrator
BHUSD
(310)-551-5100 x2357
07-09-2010 11:10 AM
Thanks for the reply I got the needed information
Thanks
Karthik G
Network Administrator
07-07-2010 10:38 PM
one basic doubt
when i create a VLAN 172.16.30.0/24
generally i do the routing in EIGRP as network 172.16.0.0 so can we use network 172.16.30.0 0.0.0.255 in eigrp routing
karthik
Hi Karthik,
EIGRP carries the subnet mask in the routing update, and it does support both variable length subnet masks (VLSM) and Classless Inter-Domain Routing (CIDR). In other words, you can subnet your network from the classful boundaries (where a class A network is 10.0.0.0 with a 255.0.0.0 subnet mask, etc.), and EIGRP will work fine.
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
07-09-2010 11:09 AM
Thanks for the reply I got the needed information
Thanks
Karthik G
Network Administrator
BHUSD
(310)-551-5100 x2357
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide