Private line emulation on uC500/CME does not generate CDR

Unanswered Question
Jul 8th, 2010
User Badges:

Hi all, I have a customer who has the following configuration in his UC500 to simulate a private line.

router#show running-config

voice-port 1/0/0

connection plar-opx 6230001

dial-peer voice 82 pots

destination-pattern 82

port 1/0/0

ephone-dn 10

number 1010

name manager

ephone-dn 11

number 6230001

name private-line

trunk 82

ephone 1

button 1:10 2:11

This works as expected, when the manager selects line 2 he gets his private line can can place calls to the CO. the problem is that calls from this private number generate call detail records with no dialed number. I have replicated this in a lab with a cisco 1700 router running cme 4.1 and the effect is the same. When the radius call detail records are examined the dialed number is totally absent. I may be wrong, but I think this may be an oversight by Cisco, but I need confirmation and if so, some idea as to when there may be a fix.

A workaround solution may be to find another way to emulate private line operation on CME without using the "trunk xx" command. Any ideas how this may be accomplished?

Thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion