Cisco DMP 4400g with Samsung 460TSn

joberhaus · ‎07-08-2010

I have seen the list of supported touch screen monitors for the Cisco DMP 4400g, but I thought I would ask if anyone knows if the DMP will work with the Samsung 460TSn. The Samsung 460TSn is an ideal monitor for conference rooms because it is just like the Cisco LCD except it is already touch screen enabled and it runs Windows XP built in. The 460TSn documentation says the touch screen mode is infrared (IR). I assume this would be an ideal setup for anyone with a conference room and it would be amazing if I could bring the touch capabilities to the DMP.

Tomas de Leon · ‎07-12-2010

The Samsung Display should work for Normal Display operations.

The TOUCH feature is NOT supported.

Which Touch driver does the Samsung Display use?

supported info can be found here:

http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272.html

Touchscreen support	Vendor	Supported Systems
	3M	Touch Sensor and Systems: 3M MicroTouch ClearTek II touch sensor 3M MicroTouch System SCT3250CX 3M MicroTouch Sensor SCT7650 3M MicroTouch System SCT3250SX 3M MicroTouch Capacitive TouchSense System 3M MicroTouch DST touch system Display Systems: 3M MicroTouch Display M1500SS (15 in.) 3M MicroTouch Display M1700SS (17 in.) 3M MicroTouch CT150 15-in. LCD Touch Monitor 3M MicroTouch ChassisTouch 17-in. LCD Touch Monitor
	ELO	All Acoustic Pulse Recognition systems
	Zytronics	Zybrid Screen systems
	General Touch	All systems supported by the ST6001S controller

I hope this helps!

Cheers!

T.