×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 7206VXR G2 number of routing table entry

Answered Question
Jul 9th, 2010
User Badges:

Hi, Can any one help me to find the maximun number of routing table entries Cisco 7206VXR G2 can handle, if possible, please also provide the reference.

Many thanks.

Correct Answer by arun kumar about 7 years 1 month ago

HI,


NPEG2 comes with default RAM of 1GB which is well adequate to hold full internet routes. In our network, NPEG2 are running with 3.5 lakhs of internet routes still around 460MB of  Processor memory free. BGP routes alone hold 41MB of memory ("show ip bgp sum" gives you memory hold by BGP).


If you are opting to receive full internet feed, then select IOS which has BGP-Next Hop Tracking feature which reduces significant load on CPU due to BGP scanner.


HTH..


thanks

Arun


Pls rate if it is helpful

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
arun kumar Wed, 07/14/2010 - 00:23
User Badges:
  • Bronze, 100 points or more

HI,


NPEG2 comes with default RAM of 1GB which is well adequate to hold full internet routes. In our network, NPEG2 are running with 3.5 lakhs of internet routes still around 460MB of  Processor memory free. BGP routes alone hold 41MB of memory ("show ip bgp sum" gives you memory hold by BGP).


If you are opting to receive full internet feed, then select IOS which has BGP-Next Hop Tracking feature which reduces significant load on CPU due to BGP scanner.


HTH..


thanks

Arun


Pls rate if it is helpful

Actions

This Discussion

Related Content