07-09-2010 12:21 PM
We just purchased WRVS4400 for our church
network, we have 5 static IP one was configured to the router, then we have a server windows 2003 that will do streaming video but I not able to use the others Static IP so I can put one to the server. Any suggestion on the set up...
LAN IP 192.168
WAN IP 209.172.xxxx provided by our ISP provider
MODE Gateway
DMZ Off
07-09-2010 02:12 PM
WRVS4400N only supports one public IP address, which is the WAN IP of the router. If you need to support multiple public IP addresses, you would need products such as RV120W or RV042+WAP4410N, or SA520W.
07-09-2010 08:34 PM
Maybe port forwarding could be an option if you have the ability to specify a
port to be used for your video streaming as an alternative to 1-to-1 NAT. Hope this helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide