ACS 5.1 and dial interface access lists.

Unanswered Question
Jul 11th, 2010

Hi

I have an ACS 4.2 config with some access-lists applied via the Tacacs custom attributes similar to the Server Configuration in the following example.

http://www.cisco.com/en/US/partner/tech/tk59/technologies_configuration_example09186a0080094656.shtml#NetPro

How is this best applied in ACS 5.1 ?

I thought I could take the access list entries and create DACL's in 5.1 with them and reference the list in the common tasks of a shell profile.  There is an Access-list drop down box there but when I select static against the access-list line I am asked for a value rather than being offered a list of my pre-configured DACLs.  Do I enter the access-list lines in the value field here or am I doing this the wrong way ?

Many thanks, Stephen.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion