07-12-2010 02:42 AM - edited 03-04-2019 09:02 AM
Hi ,
I have a scenarion , R1------R2---( private cloud)----R3------R4
| |
|---------------------------------------------------|-
Description --- 1)R1,R2 are at one site , R2 connects to private cloud.
2) R3,R4 are at another site , R3 connects to private cloud.
3) R1 n R4 have back-up secondary high cost link connection.
Query -- R1 has default route towards R2 ( for internet and all destination of R4(site 2)) , also R1 have wireless slow link with R4.
i dont have access to R2. how can i route traffic for Site 2 destinations on R1 via wireless link If R2 losses its connection to cloud.
NOTE - i dont have access to R2 and there is no dynamic protocol running.
Thanks in Advance,
Mazhar.
Solved! Go to Solution.
07-12-2010 02:53 AM
hello ,
we can use cisco ip sla technology. use route track feature.
reference to , http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/12.2/44sg/configuration/guide/swipsla.html
ip sla 1
.....
ip route 0.0.0.0 0.0.0.0 R2-IP track 10
ip route 0.0.0.0 0.0.0.0 R4-IP 111 track 20
when track 10 down, the route "ip route 0.0.0.0 0.0.0.0 R2-IP" will disappear in route table ,they the route "ip route 0.0.0.0 0.0.0.0 R4-IP" install .
07-12-2010 03:00 AM
Hi
I got a question.
How does it work when a routing protocol is applied between R1--to---R2 and R1---to---R4
example Eigrp and OSPFas Routing Protocol...
07-12-2010 02:53 AM
hello ,
we can use cisco ip sla technology. use route track feature.
reference to , http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/12.2/44sg/configuration/guide/swipsla.html
ip sla 1
.....
ip route 0.0.0.0 0.0.0.0 R2-IP track 10
ip route 0.0.0.0 0.0.0.0 R4-IP 111 track 20
when track 10 down, the route "ip route 0.0.0.0 0.0.0.0 R2-IP" will disappear in route table ,they the route "ip route 0.0.0.0 0.0.0.0 R4-IP" install .
07-12-2010 03:00 AM
Hi
I got a question.
How does it work when a routing protocol is applied between R1--to---R2 and R1---to---R4
example Eigrp and OSPFas Routing Protocol...
07-12-2010 04:10 AM
CASE 1 - If same routing protocol is running between all routers then no further tracking is required, protocol will take care of convergence.
CASE 2 - If routing protocol is running only btwn R1--R2 , R3--R4 , and R2 is not advertizing R4 destinations to R1 then similar tracking suggested by wang is required.
Hope i m not confusing.
Thanks,
Mazhar
07-12-2010 03:17 AM
Hey thanks wang for your reply,
u mean i shld track the ip sla n if sla is down thru R2 then it will install higher admin distance R4 route.
let me try this n come back to you.
07-13-2010 01:07 AM
Hey thanks wang ,
i tryied it n it works, this is a smart solution, thanks for your help.
Regards,
Mazhar.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: