cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
271
Views
0
Helpful
1
Replies

Police Service-policy individual or total?

mikedelafield
Level 1
Level 1

Hello.

If i set a service policy for the ACL match Any source and Any destination to 10Mbps does that mean the total is limited to 10Mbps or the maximum for each individual connection is limited to 10Mbps?

Thanks.

1 Reply 1

Nagaraja Thanthry
Cisco Employee
Cisco Employee

Hello,

When you set the service policy on the firewall, it is always for the whole class of traffic. So, your bandwidth calculations will also be for the whole class. While the documentation seems to be not very clear, here is some information about rate limiting.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml#rate

If you look at the example configuration, they talk about the whole class bandwidth instead of individual user bandwidth.

Hope this helps.

Regards,

NT

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: