What "request method get url" does ?

Answered Question
Jul 12th, 2010
User Badges:

Hi,


i have a ACE lb and i´d like to configure request method get url but i´m not sure what are the expected result and i couldn´t found any information on cisco.com.


Thanks

Correct Answer by UHansen1976 about 7 years 1 week ago

Hello,


Try'n have a look at this, I think you will find it useful.


http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/probe.html#wpxref46342


But in short, when applying e.g an http-probe to your serverfarm, you can specify a request method (GET og HEAD) to request specific content from the rserver using http. Combined with either http response-code check or regex, this provides for more detailed availibility information on the specific rserver.


hth


/Ulrich

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
UHansen1976 Mon, 07/12/2010 - 11:52
User Badges:
  • Bronze, 100 points or more

Hello,


Try'n have a look at this, I think you will find it useful.


http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/probe.html#wpxref46342


But in short, when applying e.g an http-probe to your serverfarm, you can specify a request method (GET og HEAD) to request specific content from the rserver using http. Combined with either http response-code check or regex, this provides for more detailed availibility information on the specific rserver.


hth


/Ulrich

perpignanetworking Mon, 07/12/2010 - 12:08
User Badges:

Great, thanks. It seems this configure the HTTP probe to use the http request method (get) instead of TCP. Thank you.

Actions

This Discussion