cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3303
Views
0
Helpful
2
Replies

What "request method get url" does ?

Hi,

i have a ACE lb and i´d like to configure request method get url but i´m not sure what are the expected result and i couldn´t found any information on cisco.com.

Thanks

1 Accepted Solution

Accepted Solutions

UHansen1976
Level 1
Level 1

Hello,

Try'n have a look at this, I think you will find it useful.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/probe.html#wpxref46342

But in short, when applying e.g an http-probe to your serverfarm, you can specify a request method (GET og HEAD) to request specific content from the rserver using http. Combined with either http response-code check or regex, this provides for more detailed availibility information on the specific rserver.

hth

/Ulrich

View solution in original post

2 Replies 2

UHansen1976
Level 1
Level 1

Hello,

Try'n have a look at this, I think you will find it useful.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/probe.html#wpxref46342

But in short, when applying e.g an http-probe to your serverfarm, you can specify a request method (GET og HEAD) to request specific content from the rserver using http. Combined with either http response-code check or regex, this provides for more detailed availibility information on the specific rserver.

hth

/Ulrich

Great, thanks. It seems this configure the HTTP probe to use the http request method (get) instead of TCP. Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: