Phones Busy w/ CME

Unanswered Question
Jul 12th, 2010

Hello,

I recently installed an old 1751v into my home lab.  Currently I have a 1760v which is running my Cisco phones and it is connected to a Trixbox server which hosts my SIP phones.  Everything on that side works great, however the 1751v isn't working so good.  At first the Cisco phones I had registering with it were coming back with a busy signal, so I tried the 1751v by itself.  Separated from the rest of the network with one 7960 phone attached to it,   the phone is still coming back with a busy signal when picked up.  I am still somewhat of a novice when it comes to these CME systems, but this has me stumped even after reading over all of the 1751v config guides.  I have a feeling something minor is being left out in my config but I'm not sure what.  Any help is greatly appreciated.


Thanks

-Jeff


!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 1751v-test-lab
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip cef
!
!
!
!
multilink bundle-name authenticated

!
archive
log config
  hidekeys
!
!
!
!
interface FastEthernet0/0
ip address 192.168.0.51 255.255.255.0
speed auto
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface Vlan1
ip address 192.168.9.1 255.255.255.0
!
ip default-gateway 192.168.0.1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0 192.168.0.1
!
no ip http server
no ip http secure-server
!
tftp-server flash:P0030800400.bin
tftp-server flash:P00308000400.loads
tftp-server flash:P00308000400.sb2
tftp-server flash:P00308000400.sbn
!
control-plane
!
!
!
!
dial-peer voice 100 voip
destination-pattern 2...
session protocol sipv2
session target ipv4:192.168.0.200
dtmf-relay rtp-nte
codec g711ulaw
!
sip-ua
sip-server ipv4:192.168.0.200
!
!
telephony-service
load 7960-7940 P00308000400
max-ephones 4
max-dn 4
ip source-address 192.168.0.51 port 2000
application telephony-service
max-conferences 4 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn  1
number 1050
name Test Phone
application telephony-service
!
!
ephone  1
mac-address 0008.2154.16F2
type 7960
button  1:1
!
!
line con 0
line aux 0
line vty 0 4
login
!
ntp server 132.163.4.101
end

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content