I am currently having a cisco switch and a pix firewall,
how to create vlans on firewall to provide intervlan routing
and i have to nat the vlan subnets to outside interface,
one more requirement is i need to give outside host to inside access !
experts please help me
Here is a document on how to configure PIX sub-interfaces.
Once you have the sub-interfaces configured, you can treat them each as a separate "zone". For instance:
ip address 10.1.1.1 255.255.255.0
ip address 10.1.2.1 255.255.255.0
ip address x.x.x.x 255.255.255.0
nat (inside) 1 0.0.0.0 0.0.0.0
nat (dmz) 1 0.0.0.0 0.0.0.0
global (outside) 1 interface
Let me know if this helps! If so, please be sure to mark this topic as answered.