Solved: Port Err-disable report from cisco works

rana.samir · ‎07-13-2010

Hi All,

We have network of around 400 switches.

My question is, Is there any way I can pull up the report of Err-disable for all the switches on Cisoworks ( LMS 3.2).

Any help would be appricated.

Thanks,

Samir

Joe Clarke · ‎07-15-2010

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP. Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).

View solution in original post

rana.samir · ‎07-15-2010

Hello All,

Could you please help me in this case.

samir

Joe Clarke · ‎07-15-2010

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP. Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).