cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
837
Views
0
Helpful
2
Replies

Port Err-disable report from cisco works

rana.samir
Level 1
Level 1

Hi All,

We have network of around 400 switches.

My question is, Is there any way I can pull up the report of Err-disable for all the switches on Cisoworks ( LMS 3.2).

Any help would be appricated.

Thanks,

Samir

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP.  Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).

View solution in original post

2 Replies 2

rana.samir
Level 1
Level 1

Hello All,

Could you please help me in this case.

samir

Joe Clarke
Cisco Employee
Cisco Employee

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP.  Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: