EIGRP and BGP

Unanswered Question
Jul 13th, 2010

Here is the scenario

Internal network is BGP

Conection1   --- MPLS Internal Network  -------  T1 ------- [My router  BGP     EIGRP AS 200  NAT  My router]   --------- Ethernet------- [ Vendor router AS 200]

Connection2    --- MPLS Internal Network  -------  T1 ------- [My router  BGP     EIGRP AS 200  NAT  My router]   --------- Ethernet------- [ Vendor router AS 200]

I plan on configuring EIGRP on My router to adversise NAT subnets to Vendor network and my vendor to receive two destinations routes from vendor.

Vendor destinations 192.168.100.1/24  192.168.200.1/24

Question:  Since I have receiving the routes in EIGRP.  Do I just need to place a network statement in BGP to adverstise the routes to my Internal Network?

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
thomuff Tue, 07/13/2010 - 13:38

I have found out that I will have to redistribute the

destination routes into BGP since there is not a static route or that is terminatinng on that router.

Actions

This Discussion