1142N-A Series Security Policy

kfox · ‎07-13-2010

We recently purchased a dozen 1142's which I added to our 4404 controller running version 6.0.196.0.

I can't connect with the 802.11n protocol to any WLAN configured with WPA2 Enterprise, WEP, or WPA Enterprise with a pre-shared key.

I successfully connected using the 802.11n protocol after creating a new WLAN with no Layer 2 or Layer 3 security.

What am I doing wrong?

John Cook · ‎07-13-2010

You'll need either an Open SSID or one with WPA2/AES encryption. Check the following link for more...

-John

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

kfox · ‎07-13-2010

John,

Thanks for your help.

Looks like the 3000 clients that currently use WPA2/AES with a pre-shared key to access the Internet won't be able to take advantage of 802.11N technology.

Keith