CSM-S SSL debugging

laag3kaiser · ‎07-14-2010

Forum,

.

we have two 6513 with CSM-S module that we want to use for SSL Offloading,

we are having some trouble setting it up and suspect problems with the ssl-proxy service on the SSL Daugther card.

When running debug commands, to get more info on a possible nature of the problem, there is no output on the console/buffered log (on any debug command).

Does anyone know how to set up the SSL DC to allow debug output.

====

version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname NAPDC280_SSL_PROXY
!
logging buffered 4096 debugging

version:

Cisco Internetwork Operating System Software
IOS (tm) SVCSSL Software (SVCSSL-K9Y9-M), Version 12.2(14.6)SH2_2(4) RELEASE SOFTWARE
Copyright (c) 1986-2010 by cisco Systems, Inc.
Compiled Tue 02-Feb-10 11:35 by integ
Image text-base: 0x00400078, data-base: 0x00B06000

ROM: System Bootstrap, Version 12.2(15)YS1 RELEASE SOFTWARE

NAPDC280_SSL_PROXY uptime is 9 hours, 20 minutes
System returned to ROM by power-on
System image file is "tftp://255.255.255.255/unknown"

thanks

Gilles Dufour · ‎07-19-2010

http://www.cisco.com/en/US/partner/docs/interfaces_modules/services_modules/ssl/2.1/configuration/guide/advanced.html#wp1254193

From a workstation or PC, make a Telnet connection to one of the VLAN IP addresses on the module to reach the FDU (port 2001), TCP (port 2002), and SSL (port 2003) processor on the SSL Services Module.

Gilles