07-14-2010 08:15 AM - edited 03-10-2019 05:03 AM
Hi guys:
Does anybody know the process to update the signature version on a CISCO IPS, i want to do this manually. If somedoy can tell me the commands and all I need to make this.
Regards
Solved! Go to Solution.
07-14-2010 12:10 PM
Luis;
Manual signature updats for Cisco IPS sensors can be performed from the CLI as outlined here:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_system_images.html#wp1142504
Or from the IDM GUI as outlined here:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2126670
This same process is also used to upgrade the sensor's base software.
Scott
View solution in original post
07-15-2010 09:04 AM
Thanks Scott, that information was really helpful.
Have a nice day.
Saludos
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
