Hello

I have question related to X25 over LLC2 (XOL).

Topology,

HpServer(x25_XOL)<>(FE,CMNS--CiscoRouter—S0/0(X.25)

The X25 work fine when we use the default DSAP/SSAP 0x7E, , however DSAP/SSAP change to 0x7C or 0x7A, cisco router reject the LLC connection

We noticed the reject message in debug llc and it also show in show llc output .

The following from HP explain that DSAP value can be from range 0X70 to 0X7e, we use alternate DSAP value multiple X25 logical session on the same server.

http://g4u0420c.houston.hp.com/en/J2793-90059/ch03s03.html

Many thanks in advance for any input and advise on the router config.

ShinYaw