CUCM for Multiple Countries

equader621 · ‎07-15-2010

Would two CUCM clusters have to be deployed for the following scenario?

Two sites in US with about 550 users total

Six sites in Asia with about 300 users total

WAN between each site

Wants to deploy CUCM for call control and Unity Connection for voicemail

Could one cluster in the US be deployed for the above locations or would there have to be a cluster for US and another cluster for Asia? I understand that a one-way delay in a voice network should be less than or equal to 150 milliseconds between endpoints. WAN connectivity is not as limited as it used to be but I am not sure if a US cluster can support 300 users from Asia without quality issues.

Also, the 150ms requirement seems to pertain to phone endpoints rather than CM server to phone since the actual conversation takes place during the RTP phone to phone connection. Therefore, one cluster with good WAN connection might be sufficient.

Jaime Valencia · ‎07-16-2010

You need to meet there requirements for clustering over the WAN

Clustering Over the IP WAN

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html#wp1043996

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Dee · ‎03-18-2012

Hi,

What did u end up doing?

Also how do u structer Call privileges (CSS,partition,etc)

Thanks..