IPsec Tunnel VPN - PIX FIREWALL

Answered Question


Hi,

I have a requirement to create IPSEC tunnel from my PIX to other vendor firewall.
Please provide me with config details of PIX in detail related to this task

PIX to FIREWALL (OTHER VENDOR)

1. Please give me a detailed explaination how to create an IPSEC tunnel on PIX ?
2. What are the parameters need to match on the othervendor device to establish tunnel successfully?
3. How to enable access between private networks after establishing tunnel ?

Experts please provide a detailed explanation with configuration steps and Ip details,

Thanks,
Pramod

Correct Answer by Kevin Redmon about 6 years 9 months ago

Pramod,


Here is the configuration guide for an IPSEC VPN for PIX (7.0+):


http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/ike.html


As for the other vendor, please be sure to choose common parameters for:


Phase 1 (ISAKMP):

Hash

Authentication

Group

Encryption

Lifetime


Phase 2 (IPSEC):

Transform-set

Access-list

Peer


Let me know if this helps - if so, please be sure to mark this SR as 'answered'.


Best Regards,

Kevin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Kevin Redmon Fri, 07/16/2010 - 05:59
User Badges:
  • Cisco Employee,

Pramod,


Here is the configuration guide for an IPSEC VPN for PIX (7.0+):


http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/ike.html


As for the other vendor, please be sure to choose common parameters for:


Phase 1 (ISAKMP):

Hash

Authentication

Group

Encryption

Lifetime


Phase 2 (IPSEC):

Transform-set

Access-list

Peer


Let me know if this helps - if so, please be sure to mark this SR as 'answered'.


Best Regards,

Kevin

Actions

This Discussion