07-16-2010 01:02 AM - edited 03-11-2019 11:12 AM
Hi,
I have a requirement to create IPSEC tunnel from my PIX to other vendor firewall.
Please provide me with config details of PIX in detail related to this task
PIX to FIREWALL (OTHER VENDOR)
1. Please give me a detailed explaination how to create an IPSEC tunnel on PIX ?
2. What are the parameters need to match on the othervendor device to establish tunnel successfully?
3. How to enable access between private networks after establishing tunnel ?
Experts please provide a detailed explanation with configuration steps and Ip details,
Thanks,
Pramod
Solved! Go to Solution.
07-16-2010 05:59 AM
Pramod,
Here is the configuration guide for an IPSEC VPN for PIX (7.0+):
http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/ike.html
As for the other vendor, please be sure to choose common parameters for:
Phase 1 (ISAKMP):
Hash
Authentication
Group
Encryption
Lifetime
Phase 2 (IPSEC):
Transform-set
Access-list
Peer
Let me know if this helps - if so, please be sure to mark this SR as 'answered'.
Best Regards,
Kevin
07-16-2010 05:59 AM
Pramod,
Here is the configuration guide for an IPSEC VPN for PIX (7.0+):
http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/ike.html
As for the other vendor, please be sure to choose common parameters for:
Phase 1 (ISAKMP):
Hash
Authentication
Group
Encryption
Lifetime
Phase 2 (IPSEC):
Transform-set
Access-list
Peer
Let me know if this helps - if so, please be sure to mark this SR as 'answered'.
Best Regards,
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide