07-16-2010 05:46 AM
Hello,
I am trying to register a policy but I am getting the following error:
267808: Jul 16 12:19:25.216 GMT: %HA_EM-6-FMPD_EEM_LOG_MSG: Register event failed: Error empty reg spec, policy does not start with EEM registration command
The first lines of the script are :
::cisco:eem::event_register_timer watchog time $cputimer
namespace import ::cisco::eem::*
I have defined the following environmental variables which are used later in the script:
#show event manager environment
No. Name Value
1 cputimer 5
2 mincpu 5
3 fhandle disk0:/cpu_output.txt
The policies are in EEM:
dir
Directory of disk0:/
1 -rw- 8677 May 28 2010 11:53:56 +00:00 startup-config
2 -rw- 150725900 May 28 2010 12:02:58 +00:00 s72033-ipservicesk9_wan-vz.122-33.SXI3.bin
3 -rw- 790 Jul 9 2010 09:58:38 +00:00 cpuinfo
4 drw- 0 Jul 16 2010 08:05:38 +00:00 EEM
dir
Directory of disk0:/EEM/
5 -rw- 1101 Jul 16 2010 11:49:16 +00:00 cpuinfowatchdog.tcl
6 -rw- 1101 Jul 16 2010 12:04:34 +00:00 tm_cpuinfowatchdog.tcl
1024196608 bytes total (873299968 bytes free)
router#show event manager directory user policy
disk0:/EEM
router(config)#event manager policy cpuinfowatchdog.tcl type user
Embedded Event Manager configuration: failed to retrieve intermediate registration result for policy cpuinfowatchdog.tcl
router(config)#
267810: Jul 16 12:35:03.348 GMT: %HA_EM-6-FMPD_EEM_LOG_MSG: Register event failed: Error empty reg spec, policy does not start with EEM registration commands.
Any hints ?
Thanks in advance,
Solved! Go to Solution.
07-16-2010 08:30 AM
You are missing an extra colon between cisco and eem in this event registration line:
::cisco:eem::event_register_timer watchog time $cputimer
Thanks,
Clyde Wildes
07-16-2010 08:28 AM
You're missing a colon. Your first line must be:
::cisco::eem::event_register_timer watchdog time $cputimer
07-16-2010 08:30 AM
You are missing an extra colon between cisco and eem in this event registration line:
::cisco:eem::event_register_timer watchog time $cputimer
Thanks,
Clyde Wildes
07-16-2010 12:45 PM
Thank you very much for the reply.. That was the mistake..
08-05-2015 12:55 AM
Hi all
Am facing the same issue and I have checked the colons but it keep give me errors when trying to commit my configuration
Any other issues could cause this?
BR,
Mohammad
08-05-2015 10:12 AM
Please start a new thread for your issue. Post your current script and the error you're getting.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: