Lms 3.1 Config Archive Issue

Unanswered Question
Jul 18th, 2010
User Badges:

Hi all

I am facing an issue with lms 3.1.

Its showing partially successfull for all devices.Running and startup shows successfull.Vlan fetching is getting failed.

I tried increasing snmp timeout as well.

Pls find attached screen shot showing this.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Sun, 07/18/2010 - 10:06
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The way RME archives the VLAN configuration is to connect to the device using either telnet or SSH, then perform a "copy flash:vlan.dat tftp:".  Therefore, make sure RME can login to the devices interactively, and that TFTP is allowed between the device and the RME server.


This Discussion