07-18-2010 02:07 PM - edited 03-06-2019 12:04 PM
Hello
Backbone switch connects to edge switch with a trunk config
int giga 0/0
switchport trunk encap dot1q
switchport mode trunk
interface fa 0/1
switchport mode access
switchport access vlan 99
how can I identify how much data is transfered for vlan 99 in last 30 mins
Thanks
ST
Solved! Go to Solution.
07-19-2010 12:13 AM
Hi
I want to find the bandwidth usuage from Edge_Switch for that vlan.
is it possible
thanks
ST
Hi ST,
With command show int vlan "vlan number" you can see the avg. time of 5 min for input and output counters in bots/sec or you can try with sofwtare like MRTG or PRTG see if you can see the SVI interface utilization.
Hope to Help !!
Ganesh.H
07-18-2010 05:54 PM
You'll need to clear the counters using the command "clear count
Next is the command "sh interface
Is this what you are looking for?
07-18-2010 10:48 PM
Hello
Backbone switch connects to edge switch with a trunk config
int giga 0/0
switchport trunk encap dot1q
switchport mode trunk
interface fa 0/1
switchport mode access
switchport access vlan 99
how can I identify how much data is transfered for vlan 99 in last 30 mins
Thanks
ST
Hi,
If you have created SVI for vlan 99 then you can try with show int vlan 99 to see the amount of traffic in and out via that vlan interface.
Hope to Help !!
Ganesh.H
07-18-2010 11:13 PM
Hi
I want to find the bandwidth usuage from Edge_Switch for that vlan.
is it possible
thanks
ST
07-19-2010 12:13 AM
Hi
I want to find the bandwidth usuage from Edge_Switch for that vlan.
is it possible
thanks
ST
Hi ST,
With command show int vlan "vlan number" you can see the avg. time of 5 min for input and output counters in bots/sec or you can try with sofwtare like MRTG or PRTG see if you can see the SVI interface utilization.
Hope to Help !!
Ganesh.H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide