LWAPP: Upgrading a 1242AG to lightweight mode

Answered Question
Jul 19th, 2010
User Badges:

Hello,


i'm trying to upgrade a autonomous ap AP-AIR1242AG to lightweight, but evertime i start the tool the process is stopped, because the the tool can't reach the controller. The Tool recommands that i should permit Telnet, but it is allready permitted.


i can reach the management interface by ping, but anything else (web, ssh, telnet) doesnt work


the ap has the the version 12.3(7)JA1


controller (wlc 5508) 7.0.98.0


Upgrade Tool 3.4


Image 12.3(11)JX1


Can anyone  help me to solve this problem?

Correct Answer by Kayle Miller about 7 years 1 week ago

If it is a newer 1242 AP I'd just manually load the LWAPP Conversion image.


using this command


archive download-sw /force-reload /overwrite tftp:///c1240-rcvk9w8-tar.124-21a.JA2.tar

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Kayle Miller Mon, 07/19/2010 - 07:09
User Badges:
  • Silver, 250 points or more

If it is a newer 1242 AP I'd just manually load the LWAPP Conversion image.


using this command


archive download-sw /force-reload /overwrite tftp:///c1240-rcvk9w8-tar.124-21a.JA2.tar

ziesche Mon, 07/19/2010 - 07:51
User Badges:

thank you, the upgrade was successful, but i cant understand why i can ping the management interface but nothuing else.

Actions

This Discussion

 

 

Trending Topics - Security & Network