07-19-2010 03:02 PM - edited 03-11-2019 11:13 AM
I upgraded our 5520 to 8.3(1) last week and also upgraded the memory. If I do a "show memory" on the ASA, it reports the following:
lsfw01# sho memory
Free memory: 2313296496 bytes (108%)
Used memory: 4129154448 bytes (192%)
------------- ----------------
Total memory: 2147483648 bytes (100%)
lsfw01#
ASDM 6.3(1) also reports the same thing. I used Cisco memory for this upgrade. What would cause this?
Thanks
Solved! Go to Solution.
07-19-2010 03:11 PM
Hello,
You might be hitting a software defect CSCth13899. You need to remove the
original memory from the chassis before installing the new memory.
Hope this helps.
Regards,
NT
07-19-2010 03:11 PM
Hello,
You might be hitting a software defect CSCth13899. You need to remove the
original memory from the chassis before installing the new memory.
Hope this helps.
Regards,
NT
07-20-2010 06:28 AM
That's exactly it. I removed the old memory out of the first 5520 but did not do it on this one.
Thanks for the bug id's.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: