Solved: WCCP on Cisco 6500

CSCO11177789 · ‎07-20-2010

Hi;

I'm a little confused about wccp configuration and redirection . I want to integrate with websense cache proxy. On backbone, appliance connected on gig 5/1 for example....Also i want to redirect all http packet on vlan 10.

What am i supposed to do under gig and vlan configuration ?

Thanks.

Mohamed Sobair · ‎07-20-2010

Yes , there is no special config for the proxy, a tunnel is created dynamically with all registry information when WCCP configured on the router between the webcache and the router.

HTH

Mohamed

View solution in original post

Mohamed Sobair · ‎07-20-2010

Hi,

Here what you need to configure:

1- Enable WCCP globally by configuring ( ip wccp web-cache ) , the default version is 2

2- Redirect Vlan 10 List HTTP request globally with ( ip wccp web-cache redirect-list 100 )

access-list 100 permit tcp x.x.x.x y.y.y.y any eq www

3- Apply the redirection on the Vlan interface:

interface vlan10

ip wccp web-cache redirect in

HTH

Mohamed

CSCO11177789 · ‎07-20-2010

First of all, thanks for your reply. But i couldnt see any configuration about proxy connection port. I understood there isnt need to?

Best regards

Umut

Mohamed Sobair · ‎07-20-2010

Yes , there is no special config for the proxy, a tunnel is created dynamically with all registry information when WCCP configured on the router between the webcache and the router.

HTH

Mohamed