07-20-2010 11:12 AM - edited 07-03-2021 06:59 PM
We currently have a 1200 series with a AIR-ANT2506 covering a mid size area outdoors. We are looking to be able to connect to a new 1300 bridge that is slightly too far for the current antenna, we were considering replacing with a AIR-ANT24120 but the 7 degree vertical plane is concerning.
The antenna is mounted on rooftop and the concern is the signal may be weak on the ground do to the low vertical plane. Is this a valid concern, I'm still working through my understanding of radiation patterns.
07-20-2010 05:18 PM
If you get a bad signal, find a way to tilt the antenna.
05-29-2011 07:23 AM
check this
https://supportforums.cisco.com/docs/DOC-16627
Please mark the Question as Answered if the provided information is correct and issue is fixed.
thanks,
Vinay
08-23-2013 01:23 AM
A very good discussion on Antenna Radiation pattern.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide