07-20-2010 05:53 PM - edited 03-21-2019 02:47 AM
Hello!
Is there a simple explaination in how to set that Scenaria up?
I am a bit lost.. i know that CCA doesnt support it yet... can anyone guide me please?
i got 8.0.2 Software Pack.
Thanks!
07-20-2010 07:44 PM
Hi There,
Please see attached txt file, however there are a couple of things you need to keep in mind:
Good luck and i hope you get it working an are able to achieve what you want.
Cheers,
David.
07-21-2010 02:23 AM
thanks for your help!
this is for analogue ports because i saw some pri in the config?
also i do not need the script that i saw flowing around ... app_faxmail_onramp?
Thanks!
07-21-2010 04:52 AM
Hi There,
this is for analogue ports because i saw some pri in the config?
Ooops I forgot to modify this, but the same principle applies, there is another way to do it but I decided to use this one as I know it works and have used it before.
also i do not need the script that i saw flowing around ... app_faxmail_onramp?
Indeed you do... I actually can not remember where you get this from, I would assume that this would be in one of the software packs, you might want to look in there for it, which should be the latest one (3.x version).
Sorry I did not modify the configuration for you, i have been very busy working on some other projects and wont have time on my hands at present to re-write that part for you.
Cheers,
David.
07-22-2010 09:15 AM
hey david!
maybe its possible you guide me in how to modify this? i am a bit lost
:-( :-(
07-27-2010 10:57 AM
ok i figured it out
thanks all for the help!
07-21-2010 06:29 AM
You can download the TCL script here:
http://www.cisco.com/cgi-bin/tablebuild.pl/tclware
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide