why my disk0:64m card can not suport in 6509 romm monitor

Unanswered Question

Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 11:13 by ccai
Image text-base: 0x4002100C, data-base: 0x42020000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)

Router uptime is 52 minutes
Time since Router switched to active is 51 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6k222-ps-mz.122-18.SXD7b.bin"

cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of memory.
Processor board ID TBM05399327
R7000 CPU at 300Mhz, Implementation 0x27, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3  interface(s)
10 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion