07-21-2010 07:16 AM
Does any one know -- At Cisco Live this year -- this command was shown as an Option to see the number of
hits on L7 class maps urls.
It's not an option for me: Running A3 (2.5)
Thanks,
From A2 documentation (maybe this command was dropped from A3 -- but that would be unfortunate)
To display the statistics for all policy maps or a specific policy map that is currently in service, use the show service-policy command. This command also allows you to display statistics for a specific class map in a policy or the hit counts for match HTTP URL statements in a Layer 7 HTTP policy map. If you do not enter an option with this command, the ACE displays all enabled policy statistics.
show service-policy [policy_name [class-map class_name]] [detail | summary | url-summary] [|] [>]
07-21-2010 06:42 PM
Hi Dan,
The url-summary has only been added to the ACE module code at this time. The A2 code train is only for the module, while the A3 train is only for the appliance. The good news is that later this year, we will have a new software coming out (A4) that will be the exact same image that can be loaded on either the module or the appliance, hence all functionality will be the same for both (except the acceleration and optimization that only the appliance will support.
Hope this helps,
Sean
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide