How to configure QOS on certain IP in the Cisco ASA 5510

venkat.247cs · ‎07-21-2010

Hi,

I am need to configure QOS on certain IP in the Cisco ASA 5510. Assume the IP's are 10.0.1.5 , 10.0.1.6 , 10.0.1.7. Here i have to configure 512 KBPS for 10.0.1.5 and 2 MBPS for 10.0.1.6 and 10.0.1.7

Can this done on a ASA 5510 series? if yes can you help me how ?

Regards,
Venkat

Panos Kampanakis · ‎07-21-2010

Yes you can do it.You can match the ip addresses in an access-list, put in a class-map and the class-map in a policy map that will do policing.

Good examples for what you want to do are here https://supportforums.cisco.com/docs/DOC-1230

I hope it helps.

PK