DMM SMTP non port 25

Answered Question
Jul 21st, 2010

New installation of DMM 5.2

Customer's smtp server does not use port 25 to accept mail.

Is there a way to tell DMM to use a different port?

Thanks

I have this problem too.
0 votes
Correct Answer by garyb about 6 years 4 months ago

Please log in to your DMM appliance and start DMS-Admin. Then, do the following.

Configure  SNMP Server Settings for Your DMM Appliance

Cisco DMS  can convey its notifications to an external SNMP server.

Procedure


Step 1 Choose Settings > SNMP.

Step 2 Click the Server Status radio button to enable or  disable SNMP monitoring.

Step 3 Enter in the Host field the routable IP address or  DNS-resolvable hostname of your NMS.

Step 4 Enter in the Port field the numeric UDP port  assignment reserved for SNMP traffic.

Step 5 Apply the community string.

a. Enter in the Community String  field the password to identify that community.


Tip The default Community String  value is public.


Step 6 Click Save.

Step 7 Stop. You have completed this procedure.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
garyb Wed, 07/21/2010 - 12:00

Please log in to your DMM appliance and start DMS-Admin. Then, do the following.

Configure  SNMP Server Settings for Your DMM Appliance

Cisco DMS  can convey its notifications to an external SNMP server.

Procedure


Step 1 Choose Settings > SNMP.

Step 2 Click the Server Status radio button to enable or  disable SNMP monitoring.

Step 3 Enter in the Host field the routable IP address or  DNS-resolvable hostname of your NMS.

Step 4 Enter in the Port field the numeric UDP port  assignment reserved for SNMP traffic.

Step 5 Apply the community string.

a. Enter in the Community String  field the password to identify that community.


Tip The default Community String  value is public.


Step 6 Click Save.

Step 7 Stop. You have completed this procedure.

sdhanral Tue, 08/03/2010 - 13:01

Log into the DMM Web-GUI and Navigate to Administartion Module --> Settings --> SMTP and configure the Server IP address and custom port number.

Hope this helps.

Regards,

Sagar Dhanrale

Actions

This Discussion

Related Content