07-21-2010 11:35 AM - edited 03-13-2019 07:04 PM
New installation of DMM 5.2
Customer's smtp server does not use port 25 to accept mail.
Is there a way to tell DMM to use a different port?
Thanks
Solved! Go to Solution.
07-21-2010 12:00 PM
Please log in to your DMM appliance and start DMS-Admin. Then, do the following.
Cisco DMS can convey its notifications to an external SNMP server.
Procedure
Step 1 Choose Settings > SNMP.
Step 2 Click the Server Status radio button to enable or disable SNMP monitoring.
Step 3 Enter in the Host field the routable IP address or DNS-resolvable hostname of your NMS.
Step 4 Enter in the Port field the numeric UDP port assignment reserved for SNMP traffic.
Step 5 Apply the community string.
a. Enter in the Community String field the password to identify that community.
Tip The default Community String value is public.
Step 6 Click Save.
Step 7 Stop. You have completed this procedure.
07-21-2010 12:00 PM
Please log in to your DMM appliance and start DMS-Admin. Then, do the following.
Cisco DMS can convey its notifications to an external SNMP server.
Procedure
Step 1 Choose Settings > SNMP.
Step 2 Click the Server Status radio button to enable or disable SNMP monitoring.
Step 3 Enter in the Host field the routable IP address or DNS-resolvable hostname of your NMS.
Step 4 Enter in the Port field the numeric UDP port assignment reserved for SNMP traffic.
Step 5 Apply the community string.
a. Enter in the Community String field the password to identify that community.
Tip The default Community String value is public.
Step 6 Click Save.
Step 7 Stop. You have completed this procedure.
08-03-2010 01:01 PM
Log into the DMM Web-GUI and Navigate to Administartion Module --> Settings --> SMTP and configure the Server IP address and custom port number.
Hope this helps.
Regards,
Sagar Dhanrale
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: