07-22-2010 03:07 AM - edited 02-21-2020 04:01 AM
Hi,
I am getting the following error message when deploying IPS signature updates to some of my sensors via the CSM deployment tool:
"Failed to generate edit config delta for host component. Detail: Error while processing the host component with DNS,access-list or http-proxy"
The signature update actually deploys, but I am wondering what is causing this message. I get this with some 4240, 4255 and IDSM-II blades, but not with others and I can't see any config variances.
Does anyone have any ideas what is causing this message? The access ACLs are the same for each sensor.
Many thanks
07-22-2010 04:50 AM
Liam;
Are you making use of shared policy on these devices?
If these sensors are running IPS release 7.0, have you ensured that at least one DNS server is configured?
Scott
07-22-2010 05:27 AM
Thanks for the reply Scott....
Yes, I am using shared policies and also v7 (since when the problem has occured). I've added a DNS shared policy and will check with the next signature application (already did 502 earlier today).
Regards
Liam
07-29-2010 01:55 AM
Many thanks for your assistance Scott. The application of S503 worked without error.
Regards
Liam
07-22-2010 06:59 AM
Hi Liam,
As you mentioned you are using a shared policy, and the access ACLs for all sensors are the same, I assume that you may be using an "Allowed Hosts" shared policy.
In that case, how did you create that policy ?
Did you create the policy from the policy view page, or did you right click on the "Allowed Hosts" setting of a device in device view and select "share policy" ?
If you did the first, you may be running into a known issue. You can read more about this on the bug toolkit:
This is the workaround that should work for you in case you are indeed running into this issue:
1. Rediscover or newly add any one IPS device running 7.x version
2. Create entries for "Allowed Hosts" according to requirements.
3. Right click on "Allowed Hosts", select "Share Policy..." and specify a name for shared policy.
4. Assign this "Allowed Hosts" shared policy to one or more devices.
5. Deployment should now be successful for "Allowed Hosts".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide