- Bronze, 100 points or more
I have deployed WCCP redirection on two C6500. Unfortunatly, these C6500 share an anycast loopback ip address (as multicast rendez-vous point).
So they have both a Lo100 interfaces with the same ip address.
This adress is choosen as WCCP router-id and of course, ACNS is complaining that is seems two routers with the same ID.
Can i set the WCCP router-id on a C6500 running IOS 12.2(33)SXH4 ?
(for the same reason, we have hardcoded the OSPF router ID with "router-id <loopback0 address>").
But is there an equivalent for WCCP ?