features needed in 3925 15.0(1)M1

Unanswered Question
Jul 23rd, 2010
User Badges:

Hi,


I have tested succesfully a features in a Cisco 3845 . c3845-entservicesk9-mz.124-24.T3


this allow route map to be used with match vlan feature.


route-map test-vlan

         match vlan 3


In order to support all the traffic I want, I buy a new router cisco 3925 in a new site, but this keyword is not present on the IPbase feature set.


Cisco(config-route-map)#match ?
  as-path           Match BGP AS path list
  clns              CLNS information
  community         Match BGP community list
  extcommunity      Match BGP/VPN extended community list
  interface         Match first hop interface of route
  ip                IP specific information
  ipv6              IPv6 specific information
  length            Packet length
  local-preference  Local preference for route
  mdt-group         Match routes corresponding to MDT group
  metric            Match metric of route
  mpls-label        Match routes which have MPLS labels
  policy-list       Match IP policy list
  route-type        Match route-type of route
  source-protocol   Match source-protocol of route
  tag               Match tag of route


Can someone confirm that the feature is supported on other feature license or in a newer IOS version.


For the moment, the one installed is :c3900-universalk9-mz.SPA.150-1.M1.bin with the ipbasek9 feature enable.

I have seen that the latest is 150-1.M3 but no other train like the T train in 12.4


Thanks in advance for your responses.


Steve

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion