CSS in Extension Mobility

ali nasser · ‎07-25-2010

Dear All Expert,

System:

1 - CUCM 7.1.3

2 - voice gateway (as MGCP)

i need to seprate a device profile partition and phone set partition both has the same extension number but different partation, is this possible.

here is the senario and both has the same extension number.

Phone A (Normal DN ) has partition Local

Phone A (Extension Mobility i mean device profile ) has partition national.

this is look like lock/unlock the set. i need the user to login when he leave his office he will logout so the phoneset will be as default which is local access, when they login device profile throu extension mobility he will have the national asscess.

if any one has guide for ccm and Active Directory please send.

htluo · ‎07-25-2010

Yes, you can do that. Actually, you should configure "local" CSS on the device (phone) level and "national" on the EM DN level.

So when EM was not logged in, the effective CSS would be "local". If EM was logged in, the effective CSS would be "national" because line level CSS always supersede the device level CSS.

Michael

http://htluo.blogspot.com

Jaime Valencia · ‎07-25-2010

Just to add something, read this and you'll get a better understanding of how to do this and how it works

Building Classes of Service for Unified CM with the Line/Device Approach

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1150997

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

ali nasser · ‎07-25-2010

Thanks for your reply,

I will try to do that again i check, but i have other issue when i logon to EM the phoneset will reset completely and the same when i logout.

thanks