Adding a subscriber communications manager server in a cluster

Answered Question
Jul 26th, 2010
User Badges:

Hello,


at this moment, we have only one publisher/subscriber in our IP telephony solution. Next month, we want to give it some redundancy adding a new subscriber and creating  a cluster with these two servers. I haven´t found any guideline about  adding a new subscriber, does anyone know if there is a guideline about it?


Thanks in advance

Correct Answer by Adrian Saavedra about 6 years 12 months ago

Hello Daniel,


Sure. Here you can find the guide lines (I'm assuming you have a cluster version 7.X):


Install Software from a DVD on a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485604

Apply a Patch During Installation of a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485792

Add a New Node to an Existing Cluster

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485892


Hope it helps, please rate if it does.

Good luck!


Kind regards,


- Adrian.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Adrian Saavedra Mon, 07/26/2010 - 00:22
User Badges:
  • Gold, 750 points or more

Hello Daniel,


Sure. Here you can find the guide lines (I'm assuming you have a cluster version 7.X):


Install Software from a DVD on a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485604

Apply a Patch During Installation of a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485792

Add a New Node to an Existing Cluster

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485892


Hope it helps, please rate if it does.

Good luck!


Kind regards,


- Adrian.

Actions

This Discussion