7942 firmware upgrade on CME 4.1

Unanswered Question
Rob Huffman Mon, 07/26/2010 - 11:27
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Peter,


Did you do Step#5 below?


SUMMARY STEPS



1. enable




2. configure terminal




3. telephony-service




4. load phone-type firmware-file




5. create cnf




6. end



http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinstl.html#wp1003087



Cheers!
Rob

Actions

This Discussion