I have recently installed a router with CME funcionality to be a gateway for a small network. The router has one public IP address for it outside interface witch handles the PAT for the internal hosts. There are 3 static nat translations on another public adderss from the same pool as the IP address on the outside interface. The first and the second static nat transaltions are for port 25 and 88 and the third is on port 80. The router works properly for certain amount of time and sudenly stops all traffic for the three static nat entries(despite PAT on the outside interface works fine). Traffic does not come back until I remove one of the static nat entries and put it back again. I checked the arp entries and I found out that when they expire traffic stops. When I remove and put back the static entries arp table refills and traffic comes back again. Can you tell me how I can handle this?