ASA Multiple context in Multiple Mode

Answered Question
Jul 27th, 2010
User Badges:

Hi,


Is it possible to configure an ASA context in routed mode and another Context in transperent mode ?

Correct Answer by johuggin about 7 years 2 days ago

Hello,


Good question!


From the Command reference for 8.3 for the 'firewall transparent' command:

http://www.cisco.com/en/US/partner/docs/security/asa/asa83/command/reference/ef.html#wp2016768


The quote is the same in the 8.0 and 8.2 command references.


"

Usage Guideline

For multiple context mode, you can use only one firewall mode for all  contexts. You must set the mode in the system configuration. This  command also appears in each context configuration for informational  purposes only; you cannot enter this command in a context.
"


So, unfortunately, it looks like the answer is no. Hope this answers your question!


-Joe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
johuggin Tue, 07/27/2010 - 07:03
User Badges:

Hello,


Good question!


From the Command reference for 8.3 for the 'firewall transparent' command:

http://www.cisco.com/en/US/partner/docs/security/asa/asa83/command/reference/ef.html#wp2016768


The quote is the same in the 8.0 and 8.2 command references.


"

Usage Guideline

For multiple context mode, you can use only one firewall mode for all  contexts. You must set the mode in the system configuration. This  command also appears in each context configuration for informational  purposes only; you cannot enter this command in a context.
"


So, unfortunately, it looks like the answer is no. Hope this answers your question!


-Joe

Actions

This Discussion

 

 

Trending Topics - Security & Network