cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
475
Views
0
Helpful
1
Replies

ASA Multiple context in Multiple Mode

prasad.gsmc
Level 1
Level 1

Hi,

Is it possible to configure an ASA context in routed mode and another Context in transperent mode ?

1 Accepted Solution

Accepted Solutions

johuggin
Level 1
Level 1

Hello,

Good question!

From the Command reference for 8.3 for the 'firewall transparent' command:

http://www.cisco.com/en/US/partner/docs/security/asa/asa83/command/reference/ef.html#wp2016768

The quote is the same in the 8.0 and 8.2 command references.

"

Usage Guideline

For multiple context mode, you can use only one firewall mode for all  contexts. You must set the mode in the system configuration. This  command also appears in each context configuration for informational  purposes only; you cannot enter this command in a context.
"

So, unfortunately, it looks like the answer is no. Hope this answers your question!

-Joe

View solution in original post

1 Reply 1

johuggin
Level 1
Level 1

Hello,

Good question!

From the Command reference for 8.3 for the 'firewall transparent' command:

http://www.cisco.com/en/US/partner/docs/security/asa/asa83/command/reference/ef.html#wp2016768

The quote is the same in the 8.0 and 8.2 command references.

"

Usage Guideline

For multiple context mode, you can use only one firewall mode for all  contexts. You must set the mode in the system configuration. This  command also appears in each context configuration for informational  purposes only; you cannot enter this command in a context.
"

So, unfortunately, it looks like the answer is no. Hope this answers your question!

-Joe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: